Hydraulic Press Pipe Holder Beer Throat Machine Oil Pipe Locker Construction Pipe Shrinker

  • 1 - 4 Pieces
    $1,500.00
  • >=5 Pieces
    $1,470.00
Model Number:
Press Pipe
Lead Time:
Quantity(Pieces) 1 - 1 >1
Est. Time(days) 15 Negotiable
Report Suspicious Activity
Overview
Quick Details
Type:
Press Pipe
Brand Name:
GOGO
Place of Origin:
Zhejiang, China
Media:
oil
Power:
Solenoid
Material:
Casting
Model Number:
Press Pipe
Actuator Mode:
With Instruction
Structure:
Control
Supply Ability
Supply Ability:
20000 Piece/Pieces per Month
Packaging & Delivery
Packaging Details
Carton of Press Pipe
Port
Ningbo
Lead Time :
Quantity(Pieces) 1 - 1 >1
Est. Time(days) 15 To be negotiated

Hydraulic Press Pipe Holder Beer Throat Machine  Oil Pipe Locker Construction Pipe Shrinker

 

 

 

 

If you need other models, please consult. Thank you.

 

 

 

 

Installation and commissioning

 

1. Handling: Forklift truck should be used to carry the machine.
 

2. Installation: The machine should be horizontally fixed on a solid foundation and grounded.
 
3. Oil injection: Open the rear side cover of the chassis and add 60 liters 46 anti-wear hydraulic oil to the tank.
 
4. Connection: Connect the power cord to the power supply specified by the machine, point the motor to observe the direction of rotation. The direction of rotation of the motor should be the same as the direction of the label arrow on the motor, or turn on the power switch after connecting the wire. If the machine moves, the opening of the die increases, the direction of rotation of the motor is correct. If the machine does not move, any two pairs of the three fire wires need to be made. You can adjust it.
 
5. Pressure adjustment: The maximum pressure of the machine system is 31.5 MPa, which is adjusted by relief valve. The pressure of clockwise adjustment increases while that of counterclockwise adjustment decreases. (Pressure has been adjusted when leaving the factory. If the pressure of relief valve needs to be rectified, it is strictly forbidden to use the equipment beyond 31.5 MPa.)
 
Matters needing attention
 
1. Do not press the pipe on the hexagon nut of the joint.
 
2. Prevent tools and other foreign bodies from entering the pipe press head.
 
3. Mould should be retreated to the back after each work, so that the spring of the die base can be opened and the cylinder can be in the pressure relief state to prolong the service life of the oil seal and spring. 4. When pressing the pipe, if two or more people operate, please pay attention to cooperation so as to avoid accidental injury.
 
5. When working, it is strictly forbidden to put your hands in the interior.
 
Maintenance
 
1. Hydraulic oil of tank should be replaced regularly according to the frequency of equipment use or working environment. It is recommended that it be replaced once a year.
 
2. Anti-wear lubricant is often injected into the moving surface of the die base.
 
3 During the working time of non-pressure pipe machine, please cover the dust-proof cover to prevent sundries from entering the die base.
 
4. The head screw of pipe press is recommended to be tightened every three months.
 
Machine operation
 
1. Open the back cover of the machine and add about 150 liters of clean 46# anti-wear hydraulic pressure to the tank.
 
2. Connect the power cord, and then open the main switch installed on the side of the machine. If the die automatically generates action, it indicates that the motor steering is correct. If there is no action, it indicates that the motor is reversed. Any two of the three wiring wires at the wiring head should be adjusted in pairs (note: power must be cut off before operation).
 
3. When the machine is used for the first time, it should be buckled 10-20 times in empty space. After observing that all parts are normal, it can be used. In winter, the locker should move 20-30 times without load to make the oil temperature higher and increase the service life of the machine.

 

 

1. Inner packing: opp bag, then carton box for each product

2. Outer packing: export standard carton, Foam outside protecting the goods against damage

3. Usually we ship your order by sea or by air...

4. We do our best to ship your order within 1 week after receiving your payment

5. We'll tell you the tracking number once your order has been sent

6. We accept T/T Bank transfer, L/C, Western Union, Moneygram, Paypal

Our Services

We have more than 12 years experience in solenoid valves
Excellent quality control is one of our main principles
Various style for each products and completely series pneumatic products for you to choose from
Sample order & small quantity order is ok
We provide OEM service, accept customer label, develop the product with your drawings or samples
Any question, will be replyed within 24 hours

Company InformationFounded in July,2014, Ningbo Fenghua GO GO Automatic company is a high-tech enterprise with all vitality, potential and comprehensive strength. The company is located in the Zhejiang Ningbo Science &Technology zone, a unique place with beautiful scenery and gifts of nature.Main products of our company : automatic parts, pneumatic solenoid valve, air water solenoid valve, hydraulic valves, gear piston or vane pumps, fittings connectors, temperature pressure transmitter, temperature controller, PLC, DCS parts, hardware stainless steel or brass or plastic parts , etc.Since its foundation, the company keeps living up to the belief of :"honest selling, best quality, people-orientation and benefits to customers. " We are doing everything to offer our customers with best services and best products. We promise that we'll be responsible all the way to the end once our services begin. FAQQ: What is your main market? A: Our main market is north America, especially USA. Q: Are you products standard? A: Our model is standard, if you have specific demand, pls tell us. Q: Do you have interest to do our own design items? A: Absolutely! We have big interest. Q: How to make the order? A: You can send us email or inquiry at alibaba directly. for samples order, you can go to our aliexpress shop and place the order.